General customers attach great importance to the selection and installation of polishing equipment such as fully automatic polishing machines, polishing machine equipment and customized polishing machines, because these will affect the future use of fully automatic polishing machines, polishing machine equipment and customized polishing machines.

The selection and installation precautions of the polishing machine are as follows:

1. Precautions for polishing machine selection:

1. We all want to buy good equipment at a low price, which involves the issue of cost performance. Please compare several manufacturers to choose a polishing machine with high cost performance, while also considering issues such as efficiency, maintenance costs, and transportation costs.

2. When choosing a polishing machine, you should first consider the size and brightness of the workpiece to be polished. On the premise of meeting the polishing requirements, consider the overall stability of the polishing machine, whether the materials used are reliable, and whether the whole is firm.

3. If there are requirements for dust removal and environmental protection, a dust removal device can be installed. Many users now choose to install dust removal equipment, which greatly improves the working environment of operators.

2. Matters needing attention in installation and operation of polishing machine:

1. First, it is necessary to conduct a comprehensive analysis of the earth pressure resistance and water level of the installation site. Only when the installation and use requirements of the polishing machine are met, the installation plan can be determined.

2. Try to clean the ground when installing the polishing machine to avoid inconvenience when installing the polishing machine.

3. Avoid high-voltage transmission lines during installation to avoid interference with the polishing machine.

4. An independent power supply is required to avoid sharing with other high-power electrical appliances.

5. The installation of the polishing machine requires a relatively spacious installation site, and it is very important to have enough operating space.

6. Polishers installed in rainy, humid and saline-alkali areas cannot be installed on ordinary muddy ground, otherwise many issues such as ventilation and drainage need to be considered.

7. The polishing machine must not be installed on the tuyere, otherwise the polishing machine will not work normally when the wind blows.

8. Before the connection of the polishing machine is energized, it must be safely grounded. To ensure safety, it must not be used without grounding outside the machine.

9. The power distribution box of the polishing machine is equipped with an emergency stop button, and the machine can be stopped immediately if necessary.

10. Before starting the machine, check whether the polishing wheel is firmly assembled.

11. The power must be cut off when installing or replacing the polishing wheel.

12. When installing the polishing wheel and the thousand impeller, check whether the blade angle is upward.

13. Before starting the machine, the direction of rotation of the polishing wheel must be consistent with the direction of the arrow on the safety cover.

14. The workpiece must be placed in the workpiece groove, and it will automatically rotate and polish forward when it approaches the polishing wheel.

15. Place the machine on a solid ground and correct the level so that the machine can work smoothly.